Top Four Enemies Of Stainless Steel Cable Trays Which Cause Corrosion

The cable trays are available in different sizes and various types of material. There are numerous users of the cable trays in the market which prefer material that is easy to clean, maintain, and handle. Iron is very susceptible to corrosion and turns yellow/orange when rust starts to form on it. To protect the product from corrosion, the cable tray manufacturers used various other types of materials which are less subtle to corrosion. The other materials also need little care to go longer with you. To maintain the great strength of the product, you need to keep it away from these things.

Top Four Enemies of Stainless Steel Cable Trays Which Cause Corrosion:-


Chloride - The cable trays installed indoors and outdoors are often cleaned with the help of cleaners. The harsh chemical cleaners mostly made with the chlorines/chlorides which harm the stainless steel to the extreme. Chlorine is mostly used in the swimming pools to keep the water clean and safe from contaminations. It breaks down the protective layer of the material and there are more chances of corrosion. Avoiding such cleaners which contain chlorine can prevent such occurrence of rusting.


Mechanical Abrasion - The settlement of dirt and dust depends on the surroundings. The cable trays get dirty easily if they are installed outside. Things that will scratch the surface of the steel like wire brushes; steel pads and scrapers should be avoided. The soft cloths and plastic scouring pads are recommended to clean the surface without any harm as a safe alternative. They are soft on the surface and don't harm the surface of the steel.


Hard Water - Hard water is considered as the bad element for cleaning purpose due to the presence of minerals in it and in a high amount. It can be found in all over the world, only mineral content changes with the geographical condition of the place. Use of hard water for the cleaning purpose may leave spots on the surface of the steel and damage the protective layer. When heated it may get deposited on the surface which can increase the risk of corrosion.


Other Deposit - The excessive build up depending on the type of the process carried within the industry may damage the outer layer of stainless steel which harms the working capacity and quality of the products. Keep the surface neat and clean. This is mainly for the food processing units which involve the use of natural chemicals present in the food. The chemicals can react with the properties of the steel which deteriorate the conditions.


Looking for Cable Tray Manufacturers in India, then Brilltech Engineers. is the right choice. A well known Ladder Cable Tray Manufacturers and suppliers from Noida India.



By Nitin Pratap Singh 



Article Source:  Top Four Enemies Of Stainless Steel Cable Trays Which Cause Corrosion